snapmaker.com

🚛 Free shipping over $89 in 48 states (excl. select modules).

💰30-Day Price Match: Get the price difference as a Gift Card if the price drops within 30 days.

🛠️1-Year Warranty Protection: Covers all machines and modules.

Select Your Country / Region according to your shipping address
Products may have different prices and availability based on country/region.
User:
Manage Addresses Log out
United States (English / $ USD)
Stay Updated!

Stay Updated!

Subscribe to get updates on our new products and exclusive promotions.

It looks like you're in a different region. Switch to the recommended store for local shipping and pricing.
Switch Now
1 4

Snapmaker × Phaetus Liber™ High Flow Hotend for U1

$99.00 $119.00

Product Overview
• Up to 87% higher volumetric flow.
• High-speed printing for large prints with long, continuous extrusion paths.
• DLC-coated hardened steel for wear resistance.
• Seamless heat break helps reduce clogging.
• Integrated design allows for easy replacement.

Compatibility
Snapmaker U1

Online Tutorial
• Replacement and usage guide on Snapmaker Wiki

Note
• CF/GF-reinforced filaments, Wood PLA, and TPU are not recommended due to potential clogging or feeding issues during high-flow printing.
• Best suited for large prints with long, continuous extrusion paths. Speed gains may be limited for fine details, complex curves, or frequent turns.
• Perform a cold pull when switching from high-temperature filaments (such as ABS, ASA, PA, or PC) to heat-sensitive filaments (such as PLA or PETG) to help prevent clogging. See the Snapmaker Wiki for instructions.
• U1 currently requires all hotends used in the same print to be the same size.

Learn More Hide
Option

Recommendations

PETG-CF Filament (RFID) - 1kg
Filament Bulk Sale
Featured RFID Filament

As low as $17.25/roll (4+ rolls) | $16.10/roll (6+ rolls) | $14.95/roll (10+ rolls)

Filament Bulk Sale
Featured RFID Filament

As low as $17.25/roll (4+ rolls) | $16.10/roll (6+ rolls) | $14.95/roll (10+ rolls)

Black(0D0D0D)
PETG-CF Filament (RFID) - 1kg
$34.99
Black(0D0D0D)
Black(0D0D0D)
Purple(706399)
Burnt Orange(C7653E)
Dark Red(853E3E)
Teal(237D7C)
Deep Blue(2F4E93)
Dark Gray(606068)
Wine Red(823F2E)
PLA-CF Filament (RFID) - 1kg
$29.99
Wine Red(823F2E)
Wine Red(823F2E)
Matcha Green(6F8653)
Graphite Gray(54555B )
Violet Purple(725E7C)
Chestnut Brown(9B7C56)
Denim Blue(49799D)
Black(000000)
Black (16171B)
PETG HF Filament (RFID) - 1kg
$22.99
Black (16171B)
Black (16171B)
White (F4F9FF)
Light Gray (ACB8C5)
Red (FF1523)
Orange (FB7E1B)
Cobalt Blue (0049B8)
Silver Gray (7C818E)
Violet (493AB2)
Deep Purple (473378)
Cocoa Brown (6B504C)
Yellow(FBE95C)
Green(38B837)
Dark Green(223622)
Light Pink(F5BEE9)
Translucent Yellow(FFF200)
PLA Translucent Filament (RFID) - 1kg
$22.99
Translucent Yellow(FFF200)
Translucent Yellow(FFF200)
Translucent Light Gray(B1ACA6)
Translucent Blue(46BAE0)
Translucent Pink(EEBCC8)
Translucent Dark Red(990002)
Translucent Teal(3DD1CE)
PETG Translucent Filament (RFID) - 1kg
$19.99
Translucent Teal(3DD1CE)
Translucent Teal(3DD1CE)
Translucent Blue(338CC4)
Translucent Gray(7F8896)
Translucent Green(537A37)
Translucent Brown(92713F)
Translucent Orange(FB8D02)
Translucent Pink(E68FBD)
Translucent Purple(D480EF)
Translucent White(EBEBEB)
Pink (FFC0CB)
SnapSpeed PLA Filament (RFID) - 1kg
$22.99
Pink (FFC0CB)
Pink (FFC0CB)
Cream (FFF5E0)
Cool White (D9DFE5)
Magenta (F24574)
Bright Yellow (F8F81C)
Olive Green (AFC33C)
Blue Gray (94B7C9)
Warm Beige (C19E86)
Cocoa Brown (674B47)
Pearl White (E2DEDB)
Grey (8C9099)
Green (2D9E59)
Blue (003776)
Orange (F97429)
Yellow (F4C032)
Purple (6C5BB1)
Brown (6F4C2F)
Black (080A0D)
Sky Blue (5EBDDB)
Red (E72F1D)
Butter Cream (FEE5A5)
Matte PLA Filament (RFID) - 1kg
$22.99
Butter Cream (FEE5A5)
Butter Cream (FEE5A5)
Latte Brown (D3B7A7)
Lavender Purple(AE96D4)
Mocha Brown(775C50)
Lime Green(D4E458)
Olive Green(68724D)
Steel Blue(2E4462)
Sky Blue(56B7E6)
Terracotta Red(D84B2E)
Periwinkle(ADB4E6)
Watermelon Red (FC6371)
Violet Purple (6600CC)
Celestial Blue (8BD5EE)
Sakura Pink (F3D6E5)
Ivory White (FFFFFF)
Sunburst Yellow (F0BE02)
Carbon Black (000000)
Lava Orange (F78E0E)
Pine Green (519F61)
Engine Red (DE1619)
Moss Mist (BEC9A5)
Ash Grey (485155)
Marine Blue (0078BF)
Sunset Ember(D9A63A+CC434F)
Silk Dual-Color PLA Filament (RFID) - 1kg
$24.99
Sunset Ember(D9A63A+CC434F)
Sunset Ember(D9A63A+CC434F)
Aurora Gold(D9A63A+9675CD)
Solar Alloy(D9A63A+C4C7D9)
Mint Lemonade(ECED17+44ADE5)
Sea Glass(44ADE5+18CCAF)
Ice Lake(C4C7D9+44ADE5)
City Billboard(CBF914+D623AA)
Pearl White(DFE4E4)
Silk PLA Filament (RFID) - 1kg
$22.99
Pearl White(DFE4E4)
Pearl White(DFE4E4)
Gold (F6CE1B)
Silver (BCC2C8)
Copper (AF6B4C)
Garnet Red (C1443F)
Pearl Pink (EFC2CA)
Sapphire Blue (768EC7)
Neon Green(A8FF54)
Aqua Blue(4CC1CB)
Emerald Green(55B687)
Ink Black(363538)
Bright Orange(EB6232)
Olive Green(7F865B)
Champagne(F3CFB2)
Black (000000)
TPU 95A HF Filament (RFID) - 1kg
$39.99
Black (000000)
Black (000000)
White (FFFFFF)
Silver Gray (9E9E9E)
Brown (865B41)
Bright Blue (0683EF)
Red (EE2A20)
Dark Gray (595E69)
Yellow (FFC72C)
Green (33A15A)
Oak(C0A086)
Wood PLA Filament (RFID) - 1kg
$24.99
Oak(C0A086)
Oak(C0A086)
Maple(F2C6A2)
Walnut(775C50)
Rosewood(AE7575)
Total 0 items selected
USD 0.00 USD 0.00

Payment Methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • JCB
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visa
  • payment-icon
  • payment-icon

Delivery

• 48 states, AK, HI: Ships from U.S. warehouse · 1–2 business days dispatch · 2–7 business days delivery after dispatch
• AE, AP, GU, PR: Ships from U.S. warehouse · 1–2 business days dispatch · 15–30 business days delivery after dispatch
Delivery
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Snapmaker × Phaetus Liber™ High Flow Hotend for U1

Important Notes

  1. The High Flow Hotend is best suited for printing large models with long, continuous extrusion paths, where its high-speed, high-flow capabilities can be fully utilized. For models with intricate details, complex curved surfaces, numerous corners, or frequent changes in direction, printing speeds may be limited, and the benefits of the High Flow Hotend may be less noticeable.
  2. The U1 currently does not support using hotends with different nozzle diameters in the same print job. Before printing, ensure that all toolheads used in the print job are equipped with hotends of the same nozzle diameter.
  3. For hotend installation instructions, refer to the U1 Hotend User Guide.
  4. When switching from high-temperature filaments, such as ABS, ASA, PA, or PC, to heat-sensitive filaments, such as PLA or PETG, perform a cold pull before printing to help prevent clogging. Use the printer’s unloading procedure to unload the high-temperature filament, then load the new filament without starting the loading procedure. Set the nozzle to the high-temperature filament’s printing temperature and manually extrude until the residual filament is fully purged and the new filament flows smoothly. Lower the nozzle temperature to 220–240°C and continue extruding as it cools. Then lower it to 85°C and, once cooled, slowly pull the filament upward. A three-pronged tip indicates a successful cold pull. If the filament cannot be extruded, increase the nozzle temperature or clear the nozzle with a cleaning needle. For more details, refer to the U1 Hotend User Guide on the official Wiki.

 

Recommended Printing Conditions

*Based on a 0.4mm nozzle. Printing conditions may vary with different nozzle diameters.

Nozzle Temperature

240–260°C

Bed Temperature

60–85°C

Cooling Fan

0–60%

Printing Speed

50–150 mm/s

Drying Settings Before Printing

65°C for 6 h

Physical Properties

Density

1.30 g/cm³

Light Transmission

90%

Melt Index

11.5 g/10 min (210°C, 2.16 kg)

Glass Transition Temperature

79.2°C (10°C/min)

Vicat Softening Temperature

83.2°C

Heat Deflection Temperature

77.1°C (0.45 MPa)

Mechanical Properties

Tensile Strength (X-Y)

46 ± 1 MPa

Tensile Strength (Z)

30.99 ± 1.52 MPa

Breaking Elongation Rate (X-Y)

8.17 ± 0.98%

Breaking Elongation Rate (Z)

3.16 ± 0.6%

Bending Modulus (X-Y)

2.26 ± 0.03 GPa

Bending Modulus (Z)

1.88 ± 0.03 GPa

Bending Strength (X-Y)

72.07 ± 0.72 MPa

Bending Strength (Z)

61.24 ± 0.82 MPa

Impact Strength (X-Y)

2.91 ± 0.11 kJ/m² (Notched)
34.16 ± 1.22 kJ/m²

Impact Strength (Z)

1.09 ± 0.06 kJ/m² (Notched)
5.51 ± 0.96 kJ/m²

Product box contents displayed with items listed beside it.
Text displayed on a dark background, likely an article or document.

Important Notes

  1. The High Flow Hotend is best suited for printing large models with long, continuous extrusion paths, where its high-speed, high-flow capabilities can be fully utilized. For models with intricate details, complex curved surfaces, numerous corners, or frequent changes in direction, printing speeds may be limited, and the benefits of the High Flow Hotend may be less noticeable.
  2. The U1 currently does not support using hotends with different nozzle diameters in the same print job. Before printing, ensure that all toolheads used in the print job are equipped with hotends of the same nozzle diameter.
  3. For hotend installation instructions, refer to the U1 Hotend User Guide.
  4. When switching from high-temperature filaments, such as ABS, ASA, PA, or PC, to heat-sensitive filaments, such as PLA or PETG, perform a cold pull before printing to help prevent clogging. Use the printer’s unloading procedure to unload the high-temperature filament, then load the new filament without starting the loading procedure. Set the nozzle to the high-temperature filament’s printing temperature and manually extrude until the residual filament is fully purged and the new filament flows smoothly. Lower the nozzle temperature to 220–240°C and continue extruding as it cools. Then lower it to 85°C and, once cooled, slowly pull the filament upward. A three-pronged tip indicates a successful cold pull. If the filament cannot be extruded, increase the nozzle temperature or clear the nozzle with a cleaning needle. For more details, refer to the U1 Hotend User Guide on the official Wiki.

 

Frequently Asked Questions

Product Overview

What is the High-Flow Hotend?

The High-Flow Hotend improves filament melting efficiency compared with the standard hotend, enabling higher extrusion throughput and making it particularly suitable for large-scale, high-volume, and high-efficiency printing.

It is especially beneficial for:
  • • High-efficiency printing scenarios — ideal for batch production and rapid prototyping
  • • Large-volume models with long, continuous extrusion paths
  • • Strength-oriented settings, such as thicker walls and higher infill rate

Is the High-Flow Hotend faster than the standard hotend?

The High Flow Hotend is best suited for printing large models with long, continuous extrusion paths, where its high-speed, high-flow capabilities can be fully utilized. For models with intricate details, complex curved surfaces, numerous corners, or frequent changes in direction, printing speeds may be limited, and the benefits of the High Flow Hotend may be less noticeable.

What is the maximum operating temperature of the High-Flow Hotend?

The High-Flow Hotend has a maximum operating temperature of 300°C.

Filament & Nozzle Compatibility

What filaments are supported by the High-Flow Hotend?

The High-Flow Hotend is compatible with a wide range of commonly used PLA, PETG, ABS, ASA, PA (nylon), PC, PVA, support, and other engineering filaments.
Please note that High-Flow printing is not recommended for fiber-filled filaments such as CF- or GF-filled materials, wood-filled filaments, or TPU. At high extrusion rates, fibers in CF-, GF-, and wood-filled filaments may tangle or carbonize, increasing the risk of clogging and print failure. TPU may also cause feeding instability at high extrusion rates.
For CF- and GF-filled filaments, we recommend using a hardened steel nozzle to improve wear resistance. For CF-, GF-, wood-filled filaments, and TPU, we recommend using a suitable standard hotend rather than printing in High-Flow mode.
For high-temperature filaments such as ABS, ASA, PA, and PC, we recommend using the U1 with the Top Cover to help maintain a suitable printing environment.

Can I use different nozzle diameters on different hotends?

No. Different nozzle diameters cannot be used within the same print job. All hotends used for a single print job must have the same nozzle diameter.
Different filament materials can still be used on different hotends within the same print job, as long as the nozzle diameter is the same.

Can the High-Flow Hotend use the same filament presets as the stock 0.4 mm hotend?

Yes. The High-Flow Hotend uses the same 0.4 mm nozzle diameter as the stock hotend, so you can use the same filament presets without creating new filament profiles.

Can the High-Flow Hotend and standard hotend be used on the same printer?

Yes. You can install High-Flow and standard hotends on different toolheads.
Before starting a print job, make sure the flow type and nozzle diameter specified in the sliced file match the hotend and nozzle configuration installed on the corresponding toolhead.
If the sliced file requires a High-Flow hotend but the corresponding toolhead has a standard-flow hotend, or vice versa, the printer will display a warning and the print job cannot proceed until the configuration is corrected.

Installation & Configuration

Is the High-Flow Hotend installed and used differently from the stock hotend?

No. The installation method for the High-Flow Hotend is the same as that for the stock hotend.
After installation, complete the required firmware and software configuration, and use the corresponding Liber™ system slicing parameters.

Is the High-Flow Hotend compatible with other Snapmaker printer models?

No. The High-Flow Hotend is designed specifically for the Snapmaker U1 and is not compatible with other Snapmaker printer models.

Is the High-Flow Hotend compatible with all U1 hotend configurations?

The High-Flow Hotend uses the same installation and replacement process as the standard U1 hotend.
After installation, make sure the corresponding hotend type, nozzle diameter, firmware, and software settings are configured correctly before printing.

Replacement & Components

Do I need to replace all four hotends with High-Flow Hotends?

No. You do not need to replace all four hotends at the same time.
The High-Flow Hotend is available in both 4-pack and single-pack options, allowing you to replace only the hotends you need.
You can use High-Flow and standard hotends on different toolheads. However, all nozzles used within the same print job must have the same nozzle diameter.

Does the High-Flow Hotend come with a heating element?

Yes. The High-Flow Hotend comes with the heating element pre-installed.
The heating element uses the same specifications as the original hotend. If the heating element is damaged, it can be replaced with the heating element from the original hotend.
Snapmaker

Snapmaker × Phaetus Liber™ High Flow Hotend for U1

From $34.99

Product Overview
• Up to 87% higher volumetric flow.
• High-speed printing for large prints with long, continuous extrusion paths.
• DLC-coated hardened steel for wear resistance.
• Seamless heat break helps reduce clogging.
• Integrated design allows for easy replacement.

Compatibility
Snapmaker U1

Online Tutorial
• Replacement and usage guide on Snapmaker Wiki

Note
• CF/GF-reinforced filaments, Wood PLA, and TPU are not recommended due to potential clogging or feeding issues during high-flow printing.
• Best suited for large prints with long, continuous extrusion paths. Speed gains may be limited for fine details, complex curves, or frequent turns.
• Perform a cold pull when switching from high-temperature filaments (such as ABS, ASA, PA, or PC) to heat-sensitive filaments (such as PLA or PETG) to help prevent clogging. See the Snapmaker Wiki for instructions.
• U1 currently requires all hotends used in the same print to be the same size.

Option

  • 0.4mm Hotend Bundle (4-Pack)
  • 0.4mm Hotend
View product