Skip to content
Filter Cartridge for Air Purifier (2 Pcs) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Payment methods
Earn [points_amount] when you buy this item.
The Exact Filter Cartridge You Need
Tailor-made filter cartridge for your Snapmaker 2.0, with five layers of different filters consolidated into one, it is designed to absorb what's actually emitted during laser engraving or 3D printing process [1].
G4 Filter for Coarse Filtration
Aims at relatively bigger particles (≥ 5 μm in diameter). It filters out more than 90% of PM10 and PM5.
PM10
PM5
Particles
Dust
F9 Filter for Finer Filtration
Works at particles that measure 1 μm or above in diameter. It filters out more than 95% of PM10, PM5 and PM2.5.
PM10
PM5
PM2.5
Customized Activated
Carbon Filter
A dense pack of activated carbon is also added to absorb VOCs that particulate matter filters can't capture. Unpleasant odor is no longer a problem.
VOCs
Customized Activated
Carbon Filter
Two layers of 70 mm-thick HEPA H13 filter as the final stage gate. They are able to trap up to 99.97% of airborne particles of all sizes, including PM0.3 that are known to be the most penetrating particles in the air.
PM2.5
PM0.3
All in one, Snapmaker 2.0 Air Purifier can be a pretty efficient emissions eliminator [2].
Long Live the Filter Cartridge
Efficiency is not all that matters. The different levels of filter are arranged in certain order inside the cartridge to maximize its lifespan, so that you won't need to replace the cartridge until it gets fully used.
Filter Life Detection
Snapmaker 2.0 carries out a real-time monitoring on the Filter Cartridge and shows its lifespan on the Touchscreen. It lets you know when it's time to pop in a new one.
Easy to Replace
With all the filters integrated into a single cartridge, replacement is as simple as taking the old one out, and putting a new one in.
Specifications
Snapmaker 2.0
Air Purifier
Filter Cartridge Dimensions(W × D × H)
191 × 229 × 308 mm
Filter Cartridge Weight (Single)
2.4 kg
Filter Cartridge Lifespan[4]
Approx. 3 months
Filter Cartridge Quantity
2
Package Dimensions (W × D × H)
436 × 283 × 390 mm
Package Weight
6.1 kg
In the Box
Filter Cartridge x 2
[1] Using the Air Purifier when printing with ABS or other thermo-sensitive filaments may lead to poor printing quality. If you need to filter 3D printing emissions, it's recommended to turn on the Air Purifier after printing job is finished.
[2] Tested by CAS Testing Technical Services (Guangzhou) Co., Ltd, according to standards GB/T 14295-2019 and GB/T 34012-2017. Report No.: JKK21030129A(E), JKK21030129B(E).
[3] The Touchscreen UI is subject to change due to iterations.
[4] This data is obtained under the condition of typical laser use, and is for reference only.
The Exact Filter Cartridge You Need
Tailor-made filter cartridge for your Snapmaker 2.0, with five layers of different filters consolidated into one, it is designed to absorb what's actually emitted during laser engraving or 3D printing process[1].
G4 Filter for Coarse Filtration
Aims at relatively bigger particles (≥ 5 μm in diameter). It filters out more than 90% of PM10 and PM5.
PM10
PM5
Particles
Dust
F9 Filter for Finer Filtration
Works at particles that measure 1 μm or above in diameter. It filters out more than 95% of PM10, PM5 and PM2.5.
PM10
PM5
PM2.5
Customized Activated Carbon Filter
A dense pack of activated carbon is also added to absorb VOCs that particulate matter filters can't capture. Unpleasant odor is no longer a problem.
VOCs
Ultra-dense HEPA H13 Filter
Two layers of 70 mm-thick HEPA H13 filter as the final stage gate. They are able to trap up to 99.97% of airborne particles of all sizes, including PM0.3 that are known to be the most penetrating particles in the air.
PM2.5
PM0.3
All in one, Snapmaker 2.0 Air Purifier can be a pretty efficient emissions eliminator[2].
Long Live the Filter Cartridge
Efficiency is not all that matters. The different levels of filter are arranged in certain order inside the cartridge to maximize its lifespan, so that you won't need to replace the cartridge until it gets fully used.
Filter Life Detection
Snapmaker 2.0 carries out a real-time monitoring on the Filter Cartridge and shows its lifespan on the Touchscreen. It lets you know when it's time to pop in a new one.
Easy to Replace
With all the filters integrated into a single cartridge, replacement is as simple as taking the old one out, and putting a new one in.
Specifications
Filter Cartridge Lifespan[4]
Approx. 3 months
Package Dimensions(W × D × H)
436 × 283 × 390 mm
Filter Cartridge Quantity
2
Package Weight
6.1 kg
In the Box
Filter Cartridge x 2
[1] Using the Air Purifier when printing with ABS or other thermo-sensitive filaments may lead to poor printing quality. If you need to filter 3D printing emissions, it's recommended to turn on the Air Purifier after printing job is finished.
[2] Tested by CAS Testing Technical Services (Guangzhou) Co., Ltd, according to standards GB/T 14295-2019 and GB/T 34012-2017. Report No.: JKK21030129A(E), JKK21030129B(E).
[3] The Touchscreen UI is subject to change due to iterations.
[4] This data is obtained under the condition of typical laser use, and is for reference only.
