Connect All Your Addons With a CAN Hub
The CAN Hub is a 4-in-1 docking station designed to extend the 4-pin ports of Snapmaker 2.0 product series to allow the connection of Enclosure, Air Purifier, Emergency Stop Button and other upcoming addons. Peripheral devices attached to CAN Hub can connect neatly via a single cable to the Add-on 3 port on the Controller, allowing effortless charging and data transfer.
Aluminum Alloy
Extremely Durable
Ultra Compact
Space-saving
Sleek Design
Simple and Graceful
Expandability
With one port in and four ports out, the CAN Hub comes in handy when you want to connect multiple addons to the Snapmaker 2.0 product series at the same time. You can also daisy chain CAN Hubs to integrate more addons into your Snapmaker 2.0 system.
Ease of use
The CAN Hub can be easily installed on the Snapmaker 2.0 3-in-1 3D Printers or the Enclosures and is basically plug-and-play. Moreover, its five identical ports can function as either input or output ports as you need.
Enclosure
Snapmaker 2.0
High performance
Snapmaker’s CAN Hub is tailormade for connecting multiple Snapmaker 2.0 addons to Snapmaker 2.0 product series. It not only features high compatibility, but also guarantees stable connection and reliable data transfer.
Security
Electrostatic discharge immunity, low heat generation, and anti-reverse connection protection, the CAN Hub can provide you with the safest user experience.
Specifications
Dimension (W × D × H)
136 mm × 51 mm × 26 mm
Connector Type
4 Pin
Number of Output Ports
4
Cable Length
2 m
Net Weight
0.16 kg
Package Weight
0.70 kg
In the Box
CAN Hub × 1
Quick Start Guide × 1
Sliding Nut × 4
Cable Clip × 6
Cable × 1
Conversion Plate × 2
M4 x 10 Hex Socket Head Screw × 4
M4 x 27 Hex Socket Head Screw × 4
Note
1. This product is compatible with the 4-pin addons of the Snapmaker 2.0 series.
2. This product can be connected to only the Add-on 3 port on the Controller or the 4-pin ports on the Enclosure Converter. Do not connect the CAN Hub to the Heated Bed port on the Controller.
3. When installing this product on the Enclosure, ensure the ports face upward so that the cables does not get in the way when you open the side folding door.
Correctly Installed
Incorrectly Installed
Connect All Your Addons With a CAN Hub
The CAN Hub is a 4-in-1 docking station designed to extend the 4-pin ports of Snapmaker 2.0 product series to allow the connection of Enclosure, Air Purifier, Emergency Stop Button and other upcoming addons. Peripheral devices attached to CAN Hub can connect neatly via a single cable to the Add-on 3 port on the Controller, allowing effortless charging and data transfer.
Aluminum Alloy
Extremely Durable
Ultra Compact
Space-saving
Sleek Design
Simple and Graceful
Expandability
With one port in and four ports out, the CAN Hub comes in handy when you want to connect multiple addons to the Snapmaker 2.0 product series at the same time. You can also daisy chain CAN Hubs to integrate more addons into your Snapmaker 2.0 system.
Ease of use
The CAN Hub can be easily installed on the Snapmaker 2.0 3-in-1 3D Printers or the Enclosures and is basically plug-and-play. Moreover, its five identical ports can function as either input or output ports as you need.
Enclosure
Snapmaker 2.0
High Performance
Snapmaker’s CAN Hub is tailormade for connecting multiple Snapmaker 2.0 addons to Snapmaker 2.0 product series. It not only features high compatibility, but also guarantees stable connection and reliable data transfer.
Security
Electrostatic discharge immunity, low heat generation, and anti-reverse connection protection, the CAN Hub can provide you with the safest user experience.
Specifications
Dimension
(W × D × H)
136 mm × 51 mm × 26 mm
Connector Type
4 Pin
Number of Output Ports
4
Cable Length
2 m
Net Weight
0.16 kg
Package Weight
0.70 kg
In the Box
CAN Hub × 1
Cable × 1
Quick Start Guide × 1
Conversion Plate × 2
Sliding Nut × 4
Cable Clip × 6
M4 x 27 Hex Socket Head Screw × 4
M4 x 10 Hex Socket Head Screw × 4
Note
1. This product is compatible with the 4-pin addons of the Snapmaker 2.0 series.
2. This product can be connected to only the Add-on 3 port on the Controller or the 4-pin ports on the Enclosure Converter. Do not connect the CAN Hub to the Heated Bed port on the Controller.
3. When installing this product on the Enclosure, ensure the ports face upward so that the cables does not get in the way when you open the side folding door.
Correctly Installed
Incorrectly Installed
Customer Reviews
Based on 16 reviews
75%
(12)
13%
(2)
0%
(0)
6%
(1)
6%
(1)
U
Everything is fine. Fast delivery. Could be a bit cheeper!
Thank you.
C
I have not received my unit yet I ordered the laser and rotary module which both require their own power supply. It appears to be well made. Its very expensive for a basic wired 5 way. I actually feel ripped off for having to buy something that should be included with an already pricey system. In the future I feel that if you need to charge more for the right to be able to use what you already payed a large sum for just add it to the cost and include it. I cant be the only person that has thought this. Im not going to give a 5 star review for a product that should be included anyway. Its like paying for the air in a new set of tires and thanking them for allowing you to have it. This irritated me to the point that I would send it back if not for the restocking fee.
C
Added Emergency stop and needed the CAN hub for more ports. Connected the short cable from the Emergency Stop to the CAN Hub and used the long cable to connect to the expansion port on the enclosure hub, works great.
R
Snapmaker CAN Hub
K
Design gut, Umsetzung leider Mangelhaft
Es ist leider keine Montage des Gerätes und des Not Aus Schalters an keiner der kurzen Seite des Gehäuse möglich.
Auch benötigt das Gehäuse schon ab Werk zusätzliche Durchbrüche für ein vernünftiges Kabelmanagment und der Zuführung von Filament.
Wenn man das Gehäuse nutzt, braucht man an der Seite nochmal zusätzlich Platz um das Filament zuzuführen da die Rolle dann an der Seite befestigt wird.
Hier wäre eine Vorbereitung für eine Zuführung von Oben ab Werk schon vorteilhaft gewesen. So muss man jetzt selber etwas Bohren und Basteln. Das sollte eigentlich nicht Sinn der Sache sein.
Und die Fehler in Luban bei Unterstützung der Kamera und Setzen des Startpunktes beim Lasern sind nervig.
Good design, poor implementation
Unfortunately, it is not possible to mount the device and the emergency stop switch on any of the short sides of the housing.
The housing also requires additional openings ex works for sensible cable management and the feeding of filament.
If you use the housing, you need additional space on the side to feed the filament because the roll is then attached to the side.
A preparation for a feed from above ex works would have been advantageous here. So now you have to do some drilling and tinkering yourself. That really shouldn't be the point.
And the errors in Luban when supporting the camera and setting the starting point when lasering are annoying.
Hi Kai,
Thank you for reaching out to Snapmaker.
And sorry for the trouble you've experienced.
Our agent is following up with your case via support@snapmaker.com.
If you have further questions, please don't hesitate to contact us.
Have a nice day.
Best Regards
Support Team
